Select/Multiplex bug with busses

[infuzion]

Thanks for the info rl.
I'm focusing on using audio through buses though. If the buses do not work for audio, then my project manager may give up the VSTi we're building, wasting like $1000+. I'd rather get solid confirmation, preferably a good test OSM, before I waste $50 just testing audio-buses in his huge (16Mb) VSTi.

[infuzion]

Had this bug been fully fixed yet please?

Urm, anyone? Or is everyone avoiding busses all together like me?

Has anyone used & fully tested the bus-system successfully for audio signals please? If it does work, it would make a very fast re-router:
viewtopic.php?f=7&t=6101&p=50059&hilit=matrix#p50059
cheers

[infuzion]

Had this bug been fully fixed yet please?

Urm, anyone? Or is everyone avoiding busses all together like me?

I only use them for control signals now, not audio.

Bus system is still buggy. I'm trying to use Bus Create -> Selector -> Bus Extract and the green triggers seem not to propagate correctly when this Selector is switched. It could be the link-order, but when I did some swapping there, sill bad triggering.

New bug report off to Malc.

[Andrew J]

Bus system is still buggy. I'm trying to use Bus Create -> Selector -> Bus Extract and the green triggers seem not to propagate correctly when this Selector is switched. It could be the link-order, but when I did some swapping there, sill bad triggering.

New bug report off to Malc.

I should have mentioned that I only use buses for routeing control signals from the GUI *and* these don't go through selectors. Only the audio path gets switched through the selectors. That way I avoid the problem and hence probably won't notice if it gets fixed.

[bootsy]

I'm using audio through busses sometimes but had problems in the past when using a selector on that.